SonoStar SM-500D multi-parameter monitor, horizontal body with a large screen showing multi-parameter waveforms and values

Product Details

SM-500D Multi-Parameter Monitor

SM-500D

Multi-parameter monitor: 15-inch 1024 x 768 TFT, 13 waveform channels, 14 languages. Monitors ECG, heart rate, NIBP, SpO2, respiration and temperature.

Brand: SonoStar
Price: On request
Probe frequency: See specifications
Connection: Self-contained 15-inch screen, works standalone; wired or wireless networking to a central monitoring system
Charging: See specifications
Category: ECG Monitor

Request a quote

Product overview

The SM-500D is a fifteen-inch monitor for intensive care and for the operating theatre. The screen is a high-brightness TFT at 1024 x 768, the interface is available in fourteen languages, and the unit runs on mains or on its internal battery, so a theatre list is not interrupted by moving the patient.

As standard it monitors the ECG waveform, heart rate, non-invasive blood pressure, SpO₂, respiratory rate and temperature. Invasive blood pressure, end-tidal CO₂, depth of anaesthesia and anaesthetic gas monitoring are optional, which lets one platform cover a ward bed and a theatre bay.

Rejection of defibrillation and electrosurgery interference is designed in, weak-perfusion SpO₂ monitoring is supported, and ST segment and arrhythmia analysis are provided. Non-invasive blood pressure measurement uses dual over-pressure protection. Trend data are held for 720 hours, waveforms for 2 hours, 1000 blood pressure readings and 200 alarm events. Alarms are graded three ways - sound, light and voice - with adjustable volume, and drug concentration and titration table calculations are built in. The monitor supports a nurse call system and wired, wireless or mixed networking.

Technical specifications

Specifications

Main features

Item	Data
Screen	15-inch high-brightness TFT, 1024 x 768
Languages	Interface and display in 14 languages, selectable
Power	AC or DC; suits ICU and theatre monitoring
Parameters	ECG waveform, heart rate, NIBP, SpO₂, respiratory rate, temperature; invasive pressure, end-tidal CO₂, depth of anaesthesia and anaesthetic gases optional
Interference rejection	Defibrillation and electrosurgery; weak-perfusion SpO₂ technology; ST segment and arrhythmia analysis
Blood pressure protection	Dual over-pressure protection for NIBP
Storage and replay	720 hours of trends, 2 hours of waveforms, 1000 blood pressure readings, 200 alarm events
Alarms	Three-level alarm by sound, light and voice; volume adjustable
Calculations	Drug concentration and titration table
Nurse call	Nurse call system supported
Networking	Wired, wireless and mixed networks

Basic functions and patient group

Item	Data
Basic functions	Six parameters: ECG, NIBP, SpO₂, pulse, temperature, respiration
Patient group	Adults, children and neonates
Low perfusion	Low-perfusion SpO₂ function standard
Weight	Light, easy to move
Construction	Integrated module design for monitoring stability and interference rejection

Screen and channels

Item	Data
Screen	15-inch colour TFT, 1024 x 768, Chinese and English interface
Screen layouts	Six layouts
Waveform channels	Up to 13
Large font	Large-figure display supported
Network port	Standard network port for a central monitoring system

Temperature

Item	Data
Channels	Dual temperature
Range	0 to 50 degrees C
Probe type	Surface or cavity probe
Unit	Degrees Celsius
Resolution	0.1 degrees C
Accuracy	Plus or minus 0.1 degrees C

Recorder

Item	Data
Type	Three-channel thermal recorder
Content	Three waveform channels and measured values
Modes	Real-time or alarm-triggered printing of waveforms and text

Storage

Item	Data
Trends	At least 720 hours of all-parameter trends, stored through power loss
Waveforms	12 hours of full waveforms, stored through power loss
Alarm events	200 alarm events, stored through power loss
Power-loss storage	All-parameter data retained when power is lost

Alarms

Item	Data
Levels	Three-level audible and visual alarm
Limits	Upper and lower limits adjustable for every measured parameter
Voice	Voice alarm function

Standard set and options

Item	Data
Standard	15-inch TFT at 1024 x 768; ECG, SpO₂, pulse rate, NIBP, respiration, temperature; sealed lead-acid battery; low-perfusion SpO₂; finger-clip SpO₂ probe
Options	Built-in recorder, end-tidal CO₂, depth of anaesthesia, anaesthetic gas monitoring, oxygen monitoring, touch screen, dual-channel invasive pressure

Specifications updated 2026-11-01

Typical applications

The application scenarios on this page describe the device based on its technical data and configuration. The actual scope of application is the one stated in the product registration certificate. Follow your institution's procedures and the instructions for use.

Setting / department	Typical use	Configuration note
Operating theatre	Anaesthesia and vital signs on one screen	15-inch screen, 13 channels; anaesthetic gas and depth of anaesthesia optional
Continuous monitoring	Long-period trends and waveform review	720 hours of trends, 12 hours of full waveform storage
Mixed-network central station	Joining a central monitoring system	Wired or wireless mixed network; nurse call supported

Usage and selection notes

The SM-500D belongs to the ECG and monitoring series.

The actual scope of application is the one stated in the product registration certificate. Please confirm the model and configuration with our product department.

For contraindications and precautions, refer to the instructions for use. The device must be operated by a licensed physician with the relevant qualifications.
The technical data on this page is taken from the product technical documentation; where it has been updated, the latest version applies. The listed departments and application scenarios describe the device based on its technical data, and the actual scope of application is the one stated in the product registration certificate. This page makes no claim about clinical outcome and does not constitute clinical guidance.